[MEDIA]
The machine manages to drill the holes, then the shuttles take the thread but cannot transmit it to the hook to go up. Has anyone ever faced this...
Hello everyone. For a while I have been facing a problem on Kolbus KM471. Indeed the glue on the back is not evenly distributed. Which means...
Hi My Agfa Avalon N8 show me an error : E0116. Servo Problem Any help ? Please
now the error disappeared after zeroing the machine and performing the encoder reset. Coverage ahead of the muller martini amigo plus endorsement...
I even tried to reset the API. doing this procedure. PLC Initialization In order to bring the controller to a defined start state, it is...
I overhauled the compressor yesterday, no problem with graphite blades and filter are clean. suction or discharge
The vaccum cutoff solenoid work good. I just finished checking it.
but when i try to send the cover manually. she doesn't go out
It’s working normally
I checked the eye, it works correctly. I also checked the encoder by the different positions of the automatic timing, no problem
here is a picture of the mods. here is a picture of the mods. it is as if the modules keep the error in memory.
yes that's exactly it. I think the problem may come from the modules. is there a way to reset?
When I deactivate the cover take, the machine runs normally without stopping.
Error
I checked the sensors. They are all functional. I even swapped them the problem remains. I even checked the sensor signals on the module,...
Morning all I have a problem with a Muller Martini Amigo Plus. In fact, the machine reports a "Paper jam" fault. However in reality no jam I...
We were able to identify the problem. It was coming from the encoder. At times it does not output the signals. He must be old. I ordered another...
can you tell me how to put the machine in the Zero position?
Thanks for the help but you wrote the message in Russian. So when I do the translation, it is not very correct. Can you explain to me in English ?