Sorry, just to clarify, the skew adjustment screw is on the unit to the left of the fuser and the screw is on the back end of the unit (ie....
As jeff says, the 5000 should be faster on heavier stock, it also has more professional tools (like all of the 'pro' machines) on it to keep the...
we have been running a 700 for the last 3 months and have found it to be better than the 250 it replaced. To be fair it is better specced in...
I've just had a look at the spec of the DC12 on the xerox website archive and the spec appears to be worse than the 7750 that you are using now -...
While I agree that xerox is the best choice, the 250 and especially the 700 are probably outside of your budget and complete overkill for the...
Hi MattOz, I work for a general printers and we do the kinds of things that you say you do, as well as quite a bit more. We use xerox 240 and 250...
Well, we've just said goodbye to our 250 and it went out in style! The last two weeks the print quality went bad in a whole new way. We had a fine...
Sorry, my quote about adjusting the fuser was not very clear. What I meant was choosing another setting from the paper type menu. Just because you...
Hi we've got a Dc250 and DC240 and we've always had the same problem. We can't get a clean sky blue. As I've said elsewhere on this forum, when I...
It sounds like the toner is not sticking to the card properly. Try using different fuser settings. If this doesn't work and the machine has been...
We aquired one of the first pre ROHS machines and for the first two years it was very good (the best printer/copier we have ever had - we've had...
The duplexing registration has always been a problem on our 250 and 240 machines. It appears to be caused by the tail of the paper being distorted...
We are just about to say goodbye to a DC 250 which has done over two and a half million copies in three years and it is Knackered, the last couple...
Hi Imark, If I understand your post correctly, I think you have got confused about what Process and Hold is for. Holding is just storing the...