Got this fixed. The operator mislabeled the field wires so when I put them back it's wrong. Reversed the field wiring and it works like a charm....
The field supply is 51 vdc at standstill. I didn't measure the voltage during jog. I'll check later the encoder coupling. Thanks for the advise.
Additional information I forgot to include. When I jog, the brake released and the main drive turned about 2 degrees then stop. I cleared the...
Just an update, I fixed the board field controller and now I don't have error display "9999". I tried to jog today but I got "UWR: Speed not...
Thanks Druckman. I'll check with the owner how he wants to proceed.
What could be the common problem? What am I looking for? Any hints! Power supply, capacitors, thyristors?? Thanks
Thank you Drukman for the reply. This means that the power converter board is dead. Anyone who can supply the part? Do I need to enter the...
Hi Daniel, Kumar, fellows Is there a way to possibly navigate thru the parameter 159 to see if there are other errors? Any other...
Yes, I tried to switch on and off the machine repeatedly but this error MD: Malfunction in data transfer appeared. It's the only error that...
Hi Gents, We are getting this error when print on the press "MD: Malfunction in data transfer." The four seven segment display shows "9999"....
You can series two double AA batteries and solder plus and minus to the battery. You don't have to look for exact make or model of battery.
Do you still have this board 91.144.9021/05 SSK 002? Please send picture if you still have. I need a SSK2 with EPROM 22 version How much is this?...
Hi Felipe, I have 2 pieces of E80-0046503 P6 Slot CPU left. Thanks.
You can adjust the front limit switch under the rear table.
They're are two versions, one is with small boards on top and the other version with small boards at the back. Message me through What's App...
I have E80-0046503 P6 Slot CPU. Three (3) pieces. How many do you need? [ATTACH]
Let me know if you require more details.
This is cause by backgauge motor brake air gap, linear scale or its trailing cable.
Is the screen still working or just the touch screen unoperable? I have repaired or replaced Muller Martini and Heidelberg touchscreens before....
Does the backgauge move to position when you enter a number?