We can supply this printed circuit board, but what is the problem?
For sale Como Large format Heavy Duty Paper Cutter Machine 220cm /86" Year 1987 Dual Gearbox Drive Double Arm Pull Microcut Computer Hydraulic...
Mr. Johannes, Can you explain how you did this Do you have a diagram with a description of the parts you used? I am having the same problem with...
It is that the machine runs too far and then triggers S64 I would start by degreasing the clutch and adjust it to approx. 0.35mm
The problem is that the blade delay is switched on and you have to turn it back until the red led is off. it is the rotary knob with the green...
Hello We can supply any printed circuit board for Schneider Senator Machines. Can you send me a picture of this printed circuit board and the...
Press bar pressure may be too high for the material you are cutting. There are 2 different shear bolts there is one with a drilled hole in the...
the machine has probably been without power for a while and the battery of the PLC has gone flat Some parameters have to be re-entered The best...
This is a software setting that depends on the size of the machine. what is the size and exact type of the machine?
Hi all, We have a Wohlenberg MCS system '85 of year 1984 It has a defect PB Platine, is there someone that has an electrical diagram of this...
Bert van Gompel Van Gompel Grafische Machines b.v. Tuinstraat 6 5531 GK Bladel The Netherlands Tel. + 31 (0) 497 382 269 Mob.+ 31 (0)654 722 356...
The above mentioned parts are all good the machine still works before we disassemble the valve We opened the valve because the clamp no longer...
Polar 150 CE year 1978 problems with hydraulics I am looking for a drawing of the Wessel hydraulic valve we opened the valve and then the machine...
[ATTACH] [ATTACH] [ATTACH] [ATTACH] We have a broken CRT monitor in the Wohlenberg MCS 2 we want to replace it with an LCD monitor what is the...