Hello, message 3 appears on the display. I checked it is not the bars, it looks like the phase micron where the belt is
Hello, I have a problem with my 1994 sm74. The machine stops under pressure and group 3 error appears. I have also replaced the micron that works...
Do they have a written code?
Is it in the electrical cabinent? Second level? In regards to the hydraulic pressure multiplier, I find only that of the lubrication.
Where is it from the card?
I tried to put the machine back on the front and back, but on the CPC it marks that it is always on the front. I put the machine back online and...
Here's how we did the procedure. We were in front and back and we gave the command on the CPC to find the zero and get back in line. This didn't...
Would it be possible that my machine doesn't have this hydraulic pressure multiplier? All front-to-back line movements and measurements are manual...
THANKS FOR THE SUPPORT
Thank you again for your help. As you say, I'm trying the Beguin procedure, but I don't understand the 90 bar and par 35 he put in the picture. I...
Is it true that the buttons only work on these 2 points? I'm on the side of the maneuvers between the second and the third group
Here it is:
I also have a doubt about the regulation of this. From an electrical point of view, it opens and closes
The machine is mechanically online. But CPC looks like this.
Thank you for your help. Was front and rear; I changed lines, but when I plugged in the crank and spun to change, it didn't sound like normal. I...
3rd print group
other screen
screen shot
