Yes!
To make the assumption that Toyo is the best by only comparing it with a couple inks, your only hindering yourself. I have tested over 20...
If your just running to density alone, as in "just run to the numbers", your repeat jobs and even job to job consistancy will suffer greatly..
Of course dot gain can change, there are many variables, but it still needs to be set up in the first place. Say you have 2 presses maybe...
You can up to a certain point, 3 to 5 percent while maintaining stable ink water balance. I should of been more clear on this in my post. Tim
I am amazed at some of the suggestions in this thread, to be honest, completely shocked..... I have been in hundreds of print shops across the...
Its a Heidelberg Windmill.....
2.0 is the correct pressure. I think the 4.0 is a little high and will probably prematurely wear out the Anilox roller over a long period of...
The new design will oscillate a little more, and improved design from what I have been told.
The "underlack sealer" you are refering to does not "repel" aqueous coating, it diffuses light to maintain a dull look even with the aqueous on top.
Your welcome! Good luck and let us know how it works out for ya!
Here is what works best! -Gloss paper -Matte or dull varnish -Gloss Aq. Apply matte varnish on everything you want dulled back, then flood...
This will solve your problem: Part number F2.022.702N Use only with paper weight up to 100# text, Install at the cut out on the guard before...
Not even a fair contest.............. SM52
Your welcome! I got tired of carring around a binder with all the different machines, so I came up with this!
Here ya go....
Yes, do all of them that way (1st Transfer), standard packing in the 2nd Transfer (under the water pan roller) and i would use your orange ones in...
Take off the orange jackects an install the Heidelberg factory jacket. Pack as you normally would to start, cut out a sheet of the stock you are...
Anicolor is only available in the SM52 format, not the PM nor the SM/PM74. Copied from the website; Producing short runs efficiently and...
I would check to make sure all the roller settings are correct, then check the linkage on the forms, ink and dampening first.