No This error is belong to the tb10 and dispaly controller And if you wish Then you to modify wiring changes Then it will run as stand alone unit
Do you have license on press (preset link) enbale If yes pls reach me on my whatapp
Hi Cloning always not work only 5% success rate If you can send me photo of ipc and software version I can guide you U can also reach me on...
You have to go to service /Heidelberg/tcpip Setting You wanna put dhcp ip addressed??? Pls confirm ipc sw version Depending upon sw you need...
It seem problem I break of motor. Can be fix easily. Any motor repairing person can do easily. Have to remove encoder, clean the break. Some...
Means 1) check blower is free moving (is abnormal sound is coming or not) 2) there is small fan in the drive (abive heat sink aluminum part)...
Pls confirn Porblem comes once power on machine Or it comes when you press up down button Or it come in production
What error is coming??? Also send the dipm pix when error come Possible cause 1) any mcb tripp in air star 2) blower drive trippe due heat/fault...
Hi Normally in India Encoder cost (sick srs50) cost around 125000/- inr For drive there may problem in vdcb4e card which is the part if main...
Hi Pls check machine booted properly or nit not ( feeder display Heidelberg goess Or not) S send photo of feeder display as well scu vdo
We can supply ide (sad type hard disk) Pls reach me in my mail
Hi You need new hdd disk with preloaded oem winnt/winxp Pls confirm which ipc you have Mc/mc2/mc3/mc4/mc5/mc7 Now a days Heidelberg is not...
Hi You can also buy new ipc(used one or Chinese) and it will work
Hi You can use a bios battery 3.6 volt (any battery, shape and size doesn't matter) .
There are many reson for this 1) main motor belt (oily, loose,) 2) mdps55 It selfnfaulty 3) low voltage You can check the same by going in service
Seems led/lamp /glass is dirty need s to be clean
Pls check yellow led on iopb/icpb can module under inkjone. If light is flashing ok . Have you open ipc and change plugs???
Sek error means some lock is not property clsoed
This motor is drive with combination of hak and ltk500 As per beguin say 1st swap the hak and then try to swap ltk500/ltk500-2 with same type...
Check alcohlol percentage in Alcontrol it will be showing >18%