Thanks
Hello. There is a print run on the envelopes. I start the feed, 1-10 pieces are served, then the delivery of envelopes stops. If you print paper,...
How much paint should be applied to the water rollers? How many revolutions should the car make? How long do I need to open the coasting zones for...
Hello! Question to the instructors. How much paint should be rolled at the beginning of the working day on the moisturizing rollers ? Film...
And yes, it is not necessary to make a solution below 10 degrees Celsius, there will be condensation.
Do you have problems with printing? It looks like the submersible and metering shaft is not configured, weak contact. Because of this, the water...
How to determine the correct shirt tension??
Hello. The jacket of the printing cylinder was replaced on the 3rd printing block. After that, the image does not align. On the long side of the...
We turned on the target, calibrated the screen, it doesn't help.
Hello colleagues!!! The display on the speedmaster 102 does not respond well to touching part of the screen from the third time only works. We...
How much do I need to roll out the paints on the clean rollers of the print machine? And how much paint should be rolled on the shafts of the...
Hello. Doubles the image on the axis, in left-right +-1 millimeter. Paper 65-70 grams. Print 2+0. On the service side. The double is strongest...
The pulling bar is normal and not worn out, it moves normally. Just the roller does not touch it about 4 mm.
The roller does not touch the pulling bar.
Side guide do not work correctly - sm102 Roller do not touch registration plate. But if one move side guide via cp2000 to plus/minus 1 mm, roller...
Registration Problem on every other sheet. For example: the Odd sheet number (1,3,5,7,9, etc) does not have the same calibration as the sheets...
This counter is not structurally provided. Our specialists installed it themselves 15 years ago. Now after the repair we can't set up marking...
No, Zirkon 6210.
Hello . After the repair, we can't set up the counter . it is necessary to adjust the number of sheets in the bundle, but it does not work .Help...
Hello. The risograph reduces the image by 6 millimeters compared to the specified size. Why? How to achieve the required size? Help.
