Hey Guys. Wanted to see what you guys thought of the matrix 370p? I am currently looking at one, but no nothing of this brand. Any comments,...
Hey guys. I am looking at a challenge cmt-130. Wanted to see what you guys thought about the machine. is it a good, reliable machine? Please...
have error code pu 5. The coater roller on our sm 74 will not turn on. Any ideas? Please help.
Hello. We are having trouble with our Epson 7890 proofer. It seems the colors are off. The reds are too high. We have cleaned the heads and they...
Thanks! Where are these sensors located?
hey guys. we have a sm 74 with coater. For some reason, the coater pump / system just turns off. the coater roller continues to spin but the...
Hey guys. I am having error code 12 pop up on the press and it shuts down. The code is for delivery but the area is clean. Any ideas?
Hey guys. Thanks for the messages. It was actually nothing. The weather here in Florida USA was so cold for a few days that the viscosity in...
Our SM 74 has the following error codes - Oil Lubrication Not Possible - Motor Circuit Break Oil Pump We reset the breaker, but it keeps...
Our polar cutter has the following error. "NO POSITION COUNTER IMPULSES 654". Machine is down. Can someone please help?
do you know how we can check to see where the issue is?
We checked the guards and switches for delivery. They are working correctly as the switches for the guards are on the side of the press. See...
Also, the sensor is not turning on. It is not green or red. This sensor should turn on and it is not. See picture below. [ATTACH]
[ATTACH] I am not sure what you mean? There are no sheets on the grippers in the delivery. Please explain what I should do? Thank you. See...
It should run with blue? The light here is not turning on which will not let the press run. We took card out of cabinet and switched the third...
Here is the message. Let me know. [ATTACH]
we have checked each switch on operator side and they are working (5 switches). Please let me know.
I checked the switches and they are all working. We checked the switches in the picture below. Are we checking in the correct location? Please...
I am checking the switches this morning. Should i check a particular switch?
this is the only photo i have with a blue dot. Please let me know. [ATTACH]