Search results

  1. Water steel roller inking up

    plate cleaner usually works followed by gum and left over night the most common cause of this is touching the steel rollers with MRC when washing the metering roller in fact it will ink up any time you do this meters should be off the steels for washing i also do the meters last and have the...

  2. Console monitor problem on 525

    did you find out if you could put a monitor and mouse on the machine I am having the same problem on a 524 hxx not sure if its the screen or the computer

  3. water fountain roller d

    Hi First check that your meter roller setting is not too tight as this causes pressure on the gear reducer causing the servo driver to stop i presume you have to turn off the machine or do a reset of the servo driver . If this is the problem that your having you may need to change the meter to a...

  4. ryobi 524 H Double image problem

    had an engineer in to check gripper pressure its a bit better but not solved checked pressure settings and blanket packings wonder if its timing

  5. ryobi 524 H Double image problem

    The problem does not happen if i run unit 1 + 2 on their own or units 3 + 4 on their own double image only occurs when all four units run together we run black in unit 1 and the double image occurs on the black image making type slurred would this be feeder gripper or transfer gripper setting.

  6. ryobi 524 H Double image problem

    ryobi 534h double image problem Thanks for the help will try this, now when i look a the machine i see some wear on the front side of the infeed drum i wonder if its catching the sheets at different times would this be the problem or if the grippers were not set properly as the double image...

  7. inks don't seem to dry as well

    I had similar problems for me a ph of 4.9 and conductivity of around 1400 work well if you buy a ph and a conductivity tester your problems will probably go away a test from your ink tech service will give you a starting point and you can test yourself after that also if running a technotrans or...

  8. ryobi 524 H Double image problem

    Hello, I am using a ryobi 524 H and i have a problem The black print is double imaging as it goes through the other units when i am printing heavier stock it does not happen as much but when i print 100 gsm, 115 gsm, 130 gsm or 170 gsm stock its quiet bad Hope someone has some...
Back
Top