Hi, can any body tell me minimum depth of a tungsten blade before we need to replace it Thanks
Hi, anybody have a picture of the cam positions at TDC please URGENT Here's hoping Andy
Hi anybody have a copy of the Hydraulic drawing for this machine. If yes could you email me a copy at andrewmartin58@hotmail.com
Problem with intermittent fault. Cut stops near BDC and error " cut circuit interupted" appears on screen. Cut cannot be restarted and machine has...
Hi. What hydraulic oil is used on old wohlenberg guillotines ie old 220 model t or tic
Hi everybody Why would a polar 92E keep breaking shear bolts. Knife angles OK, blade changed often. Not cutting too deep. Material ok. It's baffling
Hi, anybody know the password to access service on this model, 8520 does not work Thanks
Hi Problem, all inputs on HK card correct, press cut buttons. Clamp output lights flickers on then off as cut release LED goes of on HK card...
Hi anybody out there know the size and pitch of the clamp beam chain. On schneider 155mc. Thanks
Please. How do I erase all memory. I have memory bank fault delete 240. Battery was flat. Replaced can't get rid of error
Hi Could anybody supply me with photo of hydraulic layout please
Hi. Any body got an answer to back gauge not advancing after a cut, it does not advance the cut position on screen either.
Hi. Anybody know how to enable the alphanumeric keypad. We have a second hand one we have obtained and it doesn't work. Our other 115 E does.
Hi guys, Can any one advise my cutter has started breaking shear bolts quite often, no change in use or knife angles, blade changed as normal,...
Hi. We supply new large format guillotines to point of sale printers and all digital printers. We supply guillotines up to 4.2 metre cut. Any...
Error BRK2048 on screen any ideas anyone
Hi Perfecta 76UC. Intermittent ERROR33, manual says fault on SMS safety module replace. Any one had this problem. It will be very expensive to...
Anybody know what Error 94 means
Hi all Screen shows cut circuit interrupted after cut buttons pressed, no clamp or knife movement. Any ideas
Is it possible to interrogate the parameters on this machine to alter the knife after run time. We have fitted a new clutch complete. Gaps set...