Premier guillotine systems in England They have many spares for these machines Contact Peter Kennedy Email peterk@pgsystems.co.uk
Hi, can any body tell me minimum depth of a tungsten blade before we need to replace it Thanks
Under the front table on top of the electrical cabinet
Definitely try a new cable, you can make one up yourself with care
Also by how much does the machine measurement change
Change the lead from scale reader to pcboard. This is cheapest option first
Sounds to me the linear scale is faulty near the front of the machine or conecting cable has a break ,change lead. if no better and measurement is...
Hi, anybody have a picture of the cam positions at TDC please URGENT Here's hoping Andy
My experience, don't like them. If you can afford, buy a Polar
Hi anybody have a copy of the Hydraulic drawing for this machine. If yes could you email me a copy at andrewmartin58@hotmail.com
Problem with intermittent fault. Cut stops near BDC and error " cut circuit interupted" appears on screen. Cut cannot be restarted and machine has...
Hi. What hydraulic oil is used on old wohlenberg guillotines ie old 220 model t or tic
Error 29 means you have a stuck or faulty key on the keyboard
Hi everybody Why would a polar 92E keep breaking shear bolts. Knife angles OK, blade changed often. Not cutting too deep. Material ok. It's baffling
I don't know about Australia, but the safety standards on guillotines in the UK are very stringent. I would be very carefull doing a DIY on a...
Premier Guillotine Systems in the UK could supply a screen, plug in and go. Tel 0044 1274499833
Hi, anybody know the password to access service on this model, 8520 does not work Thanks
In the left hand leg of the machine is the main powe supply unit. Just to the left of the main board rack. There should be a plug marked 406 I...
Press button to make back gauge go backward. Machine should then calibrate itself
Hi Problem, all inputs on HK card correct, press cut buttons. Clamp output lights flickers on then off as cut release LED goes of on HK card...
