Well I bought an epson P600 and printed on the metal JT plates, I processed them as if coated paper. I baked 1 and the other sat a couple days,...
I am a small shop and digital is most of my work today. I only do 5-10 plates a week when busy and tried laser polyester but had too many issues....
Thank you, I will look into both of those. You are using polyester plates or metal?
I was wondering how you are making out using the epson R2400 with plates. I am thinking of purchasing a P800 to use with JT metal plates without...
Did VIM sell to Presstek-Mark/Andy?
The ROS unit issue seems to be present about a quarter to a third way into the sheet from the operator side of the machine. It goes from the lead...
On my Docucolor 252 I get the same thing and its the ROS unit. Its gets dirty and needs to be cleaned. You have to place a service call for it.
I've been running a DC252 for about 14 months now. I would say front to back registration is the weak link and the production finisher is good for...
Re-furbished is just another term for used. They replace only the parts that is needed to pass a few copies. If you plan on running some volume...
If its only in magenta it must be a problem with the magenta drum or developer unit. The fuser would be visible in all colors.
I've learned a bit over the last several months with my DC252. 1) Certain colors don't reproduce well, I find lighter shades of blue on my...
Hey Jeff, I ran Cannon copiers since '01 never had any problems, just couldn't afford anything to get me to the next level. I was think of the KM...
I ran a Canon C3200 for about 4 years to try out my market. The DC252 has the best prints from what I've seen from the competition. I was...
Calibrating off the glass with the Kodak color and gray scale strips the were supplied.
Hello everyone. I'm new to this site, just signed up. I'm currently leasing a Docucolor 252 w/standard rip and colorwise pro tools. I calibrate...
