First, check your IPA percentage using alcoholometer, maybe your Alcosmart reading is wrong. Second, check your IPA quality, mix 10% IPA with...
Dear Sir, The best printing and sheet transfering is achieved when the space between transfer cylinder and impression cylinder is 0.6mm. You can...
Dear Sir, First, try to make sure that your device is turning smoothly by hand, move and clean the bearings both sides. Check the overrunning...
Dear Sir, Can you send a photo for your system since there are two different systems on XL75 machines.
[MEDIA]
Dear Sir, This is (Rollers check assistant). There is an attached colored foil comes with the machine. Once you choose a unit and execute the...
Did you face this problem recently or this is an old issue?
Dear Sir These are the shims under the pincer gripper. They came with 4 different thicknesses, before you demount the gripper bar you have to know...
You are welcome, I prefer to use Saphira fountain solution with 2.5%. Note: don't try to reduce the PH by adding more fountain solution since this...
Dear Sir, Press at the over-dampening button, then. Adjust the water Pan roller to the metering roller, open the screws counter clockwise until...
Wishing all of you and your families a happy and peaceful year.
If most of your printings are low thickness paper, I strongly recommend a new SX102-8+P. Their are two major points. First, you will feel ill when...
If your feeder is pre set plus. Did you try to increase the ventory air, and reduce the suction air at the last chamber of the feeder suction...
Micheal, Did you solve the problem, send us the feedback please.
Raf is wright. You can also increase the ventory air under the front lays and reduce the suction air at the last section of your feeder suction...
Did you face the problem in both units? If yes, check out your dampening fridge, clean, mix up new water with the desire IPA and fountain...
Dear Ali, Is it at the lead edge or the tail of the sheet?
Dear Ali, As I told you before, it's impossible to print dot over dot, you are wasting your time. Because at the first pass your paper will...
Happy to hear that. You are welcome, Good luck.
Dear Ali, I don't understand why you want to print the same sheets with the same colors again. It's impossible to print dot over dot typically.
