Flipping paper doesn't solve it. I've done more complicated things but never adjusted tab blade height. Got a guide for it? It's not the PR belt....
Yep had another Monday drama where the machine wouldn't recognise XRX_HBG_003203 module... Could anyone explain why the I / 0 / II switches in...
[x]Fuser roll is fine [x]Tab blade is fine [x]PR Belt is fine [x]Coros/Grids all good, recent replace. [x] In this job it was happening on 1 sided...
Hi there guys, I've been running into this issue from time to time. Usually it's only on one edge and usually this is mostly a problem on...
I can conclude by adding that replacing these lamps fixed my creasing problem on anything less than 128GSM. Ran 90gsm gloss through it like a...
I've had 3 bosses that are pedantic about power saving ... so every weekend it needs to be shut down. Always exciting to see which error code i'll...
Hey guys, Just resurrecting this thread. I was experiencing fuser temp issues yesterday ... So logged in as PSP >> and went to component...
I had actually 're-pushed' the optical cables in yesterday to no avail. Today I actually unplugged them and plugged them back in... machine is...
Hi Guys, I was wondering if any of you could assist me with the cause of my current error codes. I'm receiving C16-350 when I try to release...
Hi there, Where i'm from this is apart of the advance training section which is only offered in very rare circumstances. I've been doing iGen...
There is two types of iGen Fluid... IGEN4/5/150 NEW FUSER FLUID -2 IN 1* 008R13096R IGEN OLD FUSER OIL - 2 IN 1 PACK* 008R13095R I still...
Generally the lifespan of the machine that Xerox has mentally is around 4-5 years. (You can then upgrade your machines and get recontracted) Sure...
I run an Igen 150... I remember the number changed from Igen 4 to 150... I think it was 111 on the Igen 4. This should fix it. It if semi fixes...
Try this >> Diagnostics >> Dc0106 Job Exerciser >> Print engine >> Test Pattern >> 311_SRA3_DeveloperRecvry Set your number of sets to 100 x 1...
How many sheets do you have to run? What GSM is this stock? It may be too thick to feed. Gauge the stock. Otherwise put 1 sheet in the tray...
The only way this problem was fixed on my iGen was replacing the iGens aircon condenser. You will need to see which aircon company is contracted...
Hi Garik. What is EDOC? is that a Service call? You are getting inboard and outboard tracking faults for your PR belt. Since the machine is...
The shop runs at around 20 degrees celsius and 40-43% humidity all year round. We run shrink wrapped boards in the trays for extra 'oomph'. So...
