Printmaster 52 2 colour for sale, 2005, 18 million impressions, numbering and perfing. contact steve@barkers-print.co.uk
printmaster 52-2 colour for sale, 2005, only 18 million impressions, numbering and perfing, with 8 numbering boxes. please contact...
Hold down the number clock button on your touch screen panel for a few second .
Good luck, let me know how it goes, i do check on here most days, when i get a chance.
I would advise opening them a little where you are running the tints, but just play around with the settings to see if you can get any better...
You also try adding a bit of reducer to the cyan, to reduce the tack, but be carefull not to add to much if you are printing tints.
What ink are you using
Also it dont have to be the form rollers alone that cause that sort of banding, it could be transfered from further up the roller train. Thats why...
Does adjusting them make any difference
If it does you would have black vent controls, that control the air that blows on to th metering roller.
To eliminate the form rollers you could remove or back them off one at a time and see if you can pinpoint the problem.
Does the sx use the airblade technology on the dampers
Have you tried cutting the oscillation down on some of the form rollers, i would also check the all the roller bearers , do you get any tinting on...
Are the form rollers oscillating or fixed
If your stream feeder is using wheels and brushes on the back edge of the sheet as it enters the head lay, the wheels should be slightly behind...
Could be a number of problems, roller settings, roller bearings, packing
but if my opinion is ever asked, by customer or boss, on best stock to print on for a job like yours, i would recommend coated stock.
when i was an apprentice on a gto 52 we was taught to put a opaque white under the silver, but i think metallic ink wasn't as good as it is now....