Hi Hi, I tried adjusting by the mark which is already marked in my machine, actually I found in my machine that switches are moved in up...
Have Have you tried changing the relay at back panel? You can find this relay in the back side of the mother board panel, the relay will be...
Yes i did solved the issue, adviced by @oabrahim in one of the reply in this thread, i have adjusted the cam switch which is available at the back...
Hi, I guess you are using the Aircool liquid on the heating roll, when its on high temperature, may be the liquids chemical sediments get...
Hi CPF, We have polar 76Em, and the knife gets freezed always when its returning to TDC from BDC, to be clearer after cutting the stock the knife...
Hi sir, I have the problem in brake, that some technician have changed the position in brake,(loosen the three screws in the brake) so now the...
Thank you so much for your kind and elaborated reply, sure i will check for the possibility of any problem in the machine before changing this...
Tha Thank you so much for the reply, can you please say me the value of that inductor? does this inductor can be replaced? if possible kindly...
thanks for the reply brother @diegoeze, you can find in this picture i have marked it with red color. actually its burnt and i couldn't able to...
I have a three TAM card for the machine polar 76EM where i find that, the PCB is burnt and i'm not sure whats is this and its value(green color...
Hello friends, I need parts manual for the Muller Martini presto saddle stitcher 1550, feeder 1551, and trimmer 1522. helps are appreciated. pls...
That was awesome work brother, keep doing. proud that still humanity exists.
Hi, In polar 76 EM we face new problem sometimes that, when we give inputs above 50 cm, the scanning takes places and its achieve its position...
In our machine we are facing a code 29 in polar 76em, what might be the solution, i would be happy of somebody helps me out.
Hello spike, The same problem am facing it right now, when i switch on the power key button the motor runs and after if i press push button no...
Hi In our machine polar 76 EM there is a different problem we are facing, first we had some unknown error as 9.31.1 then we rectified by changing...
we are printing company from saudi arabia, we are using itotec erc115dx machine, so we need service manual for this machine. So if anybody has the...
yeah, i have contacted them but no reply.
thank you Mr.seagull, no the cable length is only 5' long, and one more thing i don't have the CD, i just downloaded from the internet, because...