We went to look at the demo press in Atlanta. They were running Toyo if my memory serves me right. They were trying T&K the day we went and it...
If the machine has bridge rollers try removing them.
Nashville TN here, I am lucky to be a part of a company thats seeing growth. Thats not the case in most shops here. I have seen probably 15 shops...
IMO the Heidelberg would be the better of the 2. I would see which printed best being they are both used.
We used pieces the length of the press. One inch thick should be sufficient.
I have had some issues with this on the Ryobi 524's we have. Brush wheels being set properly often is the culprit. If they are too far forward on...
I know most will argue this case but the floors in my shop are not 6 inches thick. We used thick sheets of steel to disperse the weight. Is it...
I worked on a 700 Rolland in 2004. We ran this machine 20 hrs a day 5-6 days a week. With stocks ranging from 60# enamel to 24pt board. This...
Check the clamps to make sure they have not been moved for register. I just had a problem with the release for that reason.
Ty, Thank you for the invite. We are going to Atlanta Tuesday to see the machine. I will give Kyl a call afterwards if that is ok with you. We...
I am a working supervisor for a all Ryobi shop. We have experienced substantial growth in the last few years. We are currently running 20-24 hrs a...
Ty , We are looking at the same machine. I am curious to how this machine is doing in production? Have you had any issues at all with the...
I would start by checking the air pressure. I have also seen the clamps act up if the operator is manually trying to kick the plates. Hopefully...
The Ryobi 522 is a good machine. I personally do not think they are as durable as a Komori. I am a working supervisor in an all Ryobi shop. We...
It also depends on the tach rating of the ink. If they are not uni tack you have to run them in the sequence suggested.
If you are using a 2 step fountain solution lower the alcohol sub a little.
I have used Toyo , Van Son , and Monarch inks in the last year. We have also tried other brands. Ultimately we chose Monarch for cost and drying....
I also agree with Meny. Twice a week wouldn't be out of line depending on your impressions per week. I have used everything from Rollerwash and...
Alibryan, I work for an all Ryobi shop. We have two 7 series machines both were built around 2006. Unfortionately neither have the crawl...