ink up rollers stop press drop rollers on plate check stripe 4mm dampner to plate 2mm bridge to ink form
call a certified heidelbergh technician before you ruin your machine
total ink density for #80 gloss text HELLO GUYS /GIRLS just wanted to know what total ink density are you running at having some issuses on this...
YES JUNKER there are small ball bearings that ride in a grooved bearing and ossilate roller /pain in *** to replace
Not true call heidelberg get the part did it for my mo
i would look at heidelbergh first lots out there proven track records best perfctor would be automatic option easier for operators
H man are you using the corect powder some powders will take out gloss also if temps in dryer are too high can cause issues call ink suppliers...
hi mike the first thing i would check that the setting between water rollers and plate are correct second look for alternate water settiing like...
do not mess with this ! call heidelbergh codes are press specific
did you check the pressure betwween plate and blanket are plates or blankets to thick ? is impreesion on solenoid stuck. check. plus impreesion...
did you reset grippers in the correct position 324degree- 326 did you use 0.15 mm guage and 8mm strip of paper guage gos under stopper
call demers in florida 1800 956 3612 good luck spike
Hi folks got a question we have a lotem ctp platemaker .when the machine is spinning shakes like crazy! If you have one dose it shake?
are your headstops straight \ is the stock straight ? check the simple things and then move on
i would also check that you are not getting to much water on magenta with the problem
Are these paper plates ? What kind . If you are printing long check clamps first then packing /gippers/tighten blankets
check roller setting something not touching
I agree looks like ink build up on bar take out rollers and clean
make sure ink is not too loose try medium tac
check ink rollers are not to heavy to plate and are calcium free \ also check side play movment of rollers