SOLD!
[ATTACH] [ATTACH] [ATTACH] [ATTACH] [ATTACH] We are looking to sell or trade our Printmaster 46-2 with approx. 18m impressions. I installed new...
I get several carbonless jobs ranging from 500 sheets to 5000 sheets. The issue is it marks bad if I feed it from the regular trays and the multi...
I taped a penny to one of the clear hold down strap pieces as the envelope enters the feeder and it is registering very good now.
Anyone have a fix for skewed #10 envelopes and bad registration, it seems like it's getting worse but the registration on the lead edge of the #10...
There are 2 different set up procedures, one for the Impressia and one for iQueue. I needed to use the set up for iQueue to fix this. The Tech...
We have had our Impressia for about 2 months and it appears there is a 1/8th inch gripper ? Everything I print has to be adjusted up on the sheet...
Thanks mantman, I pulled all but 2 plastic where it is coming out and it seems to be working. It would run as many as a few hundred and it would...
Okay guys I'm really a press operator since 1980 but I've been running a folder for 20 some years and lately it's been giving me issues on the...
The attachment we had was made to convert to continuous forms for an AB DICK and yes it broke very often at the perf. They made a better unit but...
This machine seems to be too wet on unit 1, and I've set the rollers a couple times, still after about 6 or 700 copies the print is very...
We did this 30 years ago with an old AB Dick chute press and printed continuous feed forms. We bought an attachment that had a pneumatic stop that...
Ok, I loosened the pressure on each spring about 1/2 turn so there was very light grip then starting in the center I loosened the large Allen that...
I replaced all the impression cylinder grippers on my printmaster 46-2 and can't get enough pressure to hold the sheet, it drops sheets...
I'm having problems with unit 1 plate eject, it goes into the water rollers every time. Anyone know what needs to be adjusted or replaced to fix...
Never mind, I went ahead and pulled it, got the screw out and see some springs are in bad shape so I'll have to replace all of the grippers and...
I need to know how hard it is to pull the impression cylinder gripper bar, doesn't look hard but figure I'd ask before regretting pulling it. I...
I put a switch on the wire that fires that plate clamp and ran it over to the operator side under the cover and had it like that for a couple...
We currently are printing 65,000 newsletters every month on 11 x 17 70# white offset 4/4. They get folded in half then thirds for mailing. My...
look straight down at plate cyl. shaft and then push the special function 2 to on and watch for the screw to move below that cyl shaft, it's hard...