Can conductivity be measured with a ppm meter. I'm using house water with conductivity of 175/200. At 3 oz per gallon of etch reading 375 after...
New ink and dampener rollers 6 mths ago. Dampening problems ever since. Also company changed to Kodak on press developing plates and different ink...
Good morning all, I am having issues setting the dampening system for short width jobs on this press. when setting the water pan roller the...
I am having problems with this compressor, DURR-TECHNIK, K15, runs all the time. This press is 15 years old and I have had many air leaks and...
At what degree and tollerance are these rollers to be set. Also they are original and 12 years old, should they be replaced? Thanks for your help
I have constant need for resetting water rollers, new two monthes ago. will not maintain setting. crazy water swings dry and flooding. Not sure...
Hi guys, My employer is looking for part # A1.184.0020. Its a cylinder / valve unit. I do believe the valve itself is fine but the electrical...
I am having more timing issues on our SM 52. I dought that this press has ever timing adjuster at feeder checked, it may be just worn out. But let...
Good morning, This morning I turned power on to SM 52 and all power seemed ok but had a issue with pneumatic compressor . any ideas what I should...
I see there are two setting areas but cannot find anything in book about which setting is first and second. top setting is on top in slot in the...
I am trying to set rollers on a quickmaster 2010. setting screw colors in manual do not correspond to this press. I have yellow - distributor...
I have one unit, the second unit where the cylinder pressure does not work. When I turn press on it will twitch and that's it. The indicator on...
My press is not detecting the presence of the #2 washup machine. Any ideas of what may be wrong. I can program both units to wash but the second...
Where can I find the sensor for back cylinder movement, its not moving.
Question, When I start production on this press it almost always feed 1 or 2 blanks before going on impression. Timing issue ? Thanks
Anyone know the code for Error 1 / 11-02 Any assistance would be appreciated
Can anyone tell me how to actually eliminate QM 46 errors, error 1, 01-05. and plate mount red light flashing, no plate on press. Thanks
I have been asked to learn a older QM46 in the plant where I work. I believe it an early 1990'S model and it has not been taken care of and in sad...
Anyone know how to detach gate so the valve can be replaced? Also having program problem with 2nd unit blanket washer, will not work when...
Good Morning, I'm having a problem with inch button, reverse button and recently the run button not working intermittently. I can hear the switch...