Thanks for the response. Cannot hear any air leak but will remove side cover & double check. Will remove rollers & check journal. Thanks
Hi Guys We have a issue on our second unit. Cannot get a setting damper to plate on operators side have checked and re-checked settings all...
ok 57 +vat from pressparts check them out in future and there local for you.
Hi If your in UK just speak to Press Parts. www.pressparts.co.uk
Thanks for the feed back. Simple answer in the end a rat had chewed though the cable to main cabinet.
Hi Gents, Our press keeps displaying 2 sheet errors on both side lays and will not take a sheet. Have checked usual things like paper thickness...
red light showing & error symbol for insufficient pressure. Compressor is ok for some reason sensor not allowing valve to open. Any ideas ? mark
We have a problem with units 2 & 4 sticking on impression. only comes out by pushing button on valves. Our air quality is not great ( high...
Fired up our SM 74 this morning and no suction at feeder head. Checked for faults, limit switches etc. add still no suction cannot see any...
Hi Mrfixit, Thanks for the reply. Our press is Anicolor system. As stated our engineer has bypassed valves to get system to work. There are very...
Both units. rollers ok some slight shrinkage. solenoids & cylinders work ok when pressed manually but don't think certain ones are getting a...
Hi Guys We have a problem with or SM 52-2 ( 2010 model ) Ink form rollers 12 & 1 have stopped dropping on plate & roller 4 is not making...
Yes cant see anything in manual to explain how to de-activate it.
Yes cant see anything in manual.
How do you turn off ultra-sonic 2 sheet & just run on mechanical trying to run a envelope job & m/c trips. Mark
Thanks Nimesh your a star it was the delivery limit switch. Don't suppose you know how to switch off the ultra sonic 2 sheet on a 2010 SM52????...
Movement is possible but delivery plate doesn't seem to go flat to floor.
Your exactly right it barely lights then go's out.
Yes we have blow air but nu suction.
No its just feeder suction pump the feeder runs but no vacuum either with plain paper or on production. Had pump tested & motor ok.