We have a Quickmaster and the second unit plate cylinder has play. It moved back and forth circumferentialy nearly 3/16 of an inch. Does anyone...
We are having an intermittent problem where error 603 knife position error occurs. The message says wind up the cutter. We have discovered that...
I am having a problem with our quickmaster. Does anyone know the gripper degrees.
We have a Heidelberg folder and where the 2 sheet detector is you put two thicknesses of paper. The machine will then automatically adjust the...
Does anyone have the gripper degrees for a 10 color heidelberg 102 manufactured 2006. we are having a bit of doubling.
I am getting a warning Knife afterrun (703). Does anyone know what this error is. Richard
We are having an intermittent error that is causing us to have a lot of lost production. We are getting a error code s-hak 4 m3 ffbf. If anyone...
We are having a very confusing intermittent initialization error. We have lost a lot of production and the last time it occurred Heidelberg took...
We have a dynamic error. The error says s-hak 4m3 ffbf. Can anyone tell me what this means. Thanks Richard
We have a 6 color with a Drystar 2000 ir dryer. We replaced the ir bulbs but we just got an error 2011. This is maintenance, ir max running time...
We have a early year 2000 6 color Heidelberg 102. We have started to have a problem on boot up that the slow down wheels and the water motors...
We have a polar 92 xt and the touch screen needs to be calibrated. Is there a way to do that Richard
we have an old wohlenberg type 90. I need wiring diagrams. The cutter won't take a cut. Richard
We have a 6 color sm102 with a coater. On the Drystar 2000 electrical cabinet I am getting a error 1700 plc backup battery error. In the lower...
We are having a problem with our machine having intermittent faults. There are two error codes that we get. Error 7951 and error 7956. Does...
We are having a problem with the image control unit for a 10 color 40" press. The unit was manufactured in 2002. When the computer boots up at...
We are having an intermittent problem with a quickmaster. The press will be running and it will go off impression and stop for no reason. There...
We have an intermittent problem where the side guide positioning motor stops working intermittently. A motor is flashing screen for the ssk 2...
We were doing a wash up and the press stopped. An error was displayed synchronization monitor not acknowledged in pu. The next line says...
we are having a pressure problem on one of the units of a 40 inch press. Does anyone know how to check the pressure between impression and...
