It's supposed to be a non-Rip font technology.
I'm doing some research trying to speed up our processing on VDP jobs. I keep coming across the term SNAP fonts but I can't find a description of...
We were getting this one constantly. Wound up we were getting power surges. Had to bring an electrician in to permanently fix the problem.
At that point about all you can do is clean the rollers and rerun your IOI. if that doesn't do it call your tech.
What kind of volume are looking at? We throw about 50,000 impressions a week at our 7010 and it always has trouble keeping up with our volume....
Also verify that your stock is truly square if it is cut down in house. Doesn't take much to throw it off.
Aside from that check and make sure you don't have a small corner of a sheet from a previous jam in the transport path. Also look under Area 7 and...
Hey gang, We've been fighting HP for several months over some issues with our one shot feature. They are now telling us that the first inch of...
You are checking the fuser web aren't you. From time to time my second shift operator will put a new one in and he doesn't reset the clicks. I...
I just had the same fault last week. Turned out to be a bad interlock on the door.
We use a sheet of reusable adhesive vinyl for the open cover fault. Works like a charm. Our tech has our Igen so rigged I think at half of it came...
I've had this error a few times. It's probably caused by a sensor going out. Are you able to run when it comes up?
It would probably also show up on magenta, but that's the only thing I can think of. Easy to check to. Try telling another color to print in the...
Have you checked your pip underlayer?
On freeflow in the job properties select output>layout>autocenter. It will print a error page telling you the image is to large for the sheet but...
Send me your shipping info and what you actually need. Be happy to help. greg@tmguniverse.com
Send me info please greg@tmguniverse.com
Little update. We tried several different brands of envelopes. The first few were all crap and would not run reliably. Once we found the right...
We seem to have difficulty with anything under 50#, so we always tell it's a little heavier than it is. Works most of the time.
The envelopes were 9x12. Didn't have thee luxury of an envelope fitment tray. Built a rig by cutting a three ring binder on our cutter. it took 30...