I have used Graphix and IST uv systems but never arradiant. I doubt that it is much different. Usually after the system is installed you are...
When I first got into printing the Hexset from K&M was in 1997. The "Ask Joe" on KM's website replied with sequence and density info of: k-1.90...
In 1843, Richard invented the rotary printing press, a design much faster than the old flat-bed printing press. The design was patented in 1847...
In central IL it is about 18-20 for a good pressman. The union shops pay more but are closing up fast. There isn't a lot of competition to drive...
Good question. Who did invent perfecting? I don't know because the use of the term varies. Some webs have a turning bar to turn the web 180 so...
We have a Presstek 34 DI in our Heidelberg shop. It does a four color makeready start to finish in 15 minutes tops. It has two units with two...
Hello. My shop prints a fair amount of GPO work. The occasional job is on YUPO and is usually a short run of 200 sheets or so. Recently sales...
I agree with the infeed solution. Most of the 74's have brushwheels at the tail and feather wheels about two inches from the gripper. The...
I have ran serveral presses in the Speedmaster line. 1995 sm74-5p1. 1996 sm102-8 p2p4(two perfectors). 1993 sm72 6p2+L with IST u.v. 1998 sm74...
Try a scrap yard if if you are done with them and won't need them recovered. Maybe Ebay?
Might try putting a red runner on the "bareback". Those water forms on GTO usually have a rough surface that does not wash up well at all. It...
Check the cam follower on the segment for pitting or wear marks, if anything looks odd there have it replaced. It should be done by a tech due to...