1.210.24 is the latest version that I have.
Installing the software is quite simple, its done through the Centerware Services. Type in the IP address of the printer on a cpu that's on the...
7675 Software is very problematic
Lots of questions you should be asking. Most of these are sold through a Broker, they never see it before or after the sale. So they typically are...
Only the optical drive.
My bad Adriansto, yes its a Network controller not CCM,. :) The cable is a USB/ male to USB/ male, I have used one from the computer store with...
Its referring to the usb cable that goes from the CCM (box on the back) to the UI. If its not there then you need to get one.
Is this a machine you have had for a long time or did you just buy it? And is it host-to-host USB or Firewire? Last what is the software version...
Have you checked your power in the building? Make sure you are within the recommended power by Xerox. It may be the K BIAS PWB is supplying too...
Looks like the IBT either has some oil on it (from touching it) or the Fuser needs to be replaced. Try the later first.
I'm a re seller and I have sold and serviced quite a few.
Fuser belts will start to go out..But if you're on Xerox serv contract who cares. :)
That's a steep upgrade.. They are nice presses but it may be more than you need. Do you run a lot of heavy paper? The one distinct advantage it...
The last thing I would do is change the Dev units.. $$$ Try cleaning the ROS windows, they get toner on them if you don't keep the inside of the...
Are you running LEF? I think (I'm a Xerox Tech) you have different issues on the individual colors. The M is in the process direction, and having...
maybe the yellow? I don't have an eye of colors. Clean them all, and replace the Ozone filter below and behind tray 5. Also check the tops of the...
This is for a Docucolor but the procedure is the same. Remove the Fuser it will make the transfer drawer lighter. https://youtu.be/MrDpzLIhVAQ
I know this is a late reply but that's not a developer issue, developer lines are thin and resemble a pen line. Your issue is with the ROS, it has...
Hi, Recently replaced the HDD on my EX95 and reloaded software with no issues. Now I'm getting a "BOOTMGR" missing. Is this repairable?
I realize this is an old post but it sounds to me like you are having an issue with your Toner Sensor. Fairly common on this unit. The measurement...
