please check the settings between the pan roller and the metering roller,you may have the ink stripes set well but you have not enough contact...
Hi,am looking for a KBA PERFORMA 66 part book, if possible in pdf,the press is a two colour with a perfecting unit . Anyone with info can email me...
Hi guys,I have a red Light on at the feeder panel of the GTOV 52,the machine cannot run but can inch both directions,the machine was in production...
@a qazi81 very much what I see,I have an alcolor system, I have seen much of the thin line which vanishes after printing several sheets,I will...
@simpleson @aqazi81.....please advice on the same, am considering the possibility, based on the fact that it mostly happens on thin stock, rarely...
ok,thanks,let me give it a try then I will update you on the progress,I appreciate your help.
aqaz81, its on the lateral side,i use ctp plates but the problem is on both long and short grain paper,so long as its a light grammage but on...
Hi guyz,am having an issue with the size of the image printed on 115gsm art paper on a 4 colour MOFP press,the images don't seem to be of the same...
junker1984,thanks alot,I din't know it applies to all presses.
Could someone guide me on this one,when the specifications are set to 73mm-160mm on the SPF 20A unit,what is the reference,between centers of the...
This goes to mechanical engineers on-line,what's the normal operating COMPRESSED AIR pressure in bars for the MOFP PRESS pneumatic system ?
Hi guys, I have an issue with the Horizon FC-20A trimmer unit, the knife doesn't run on AUTO but when you use the manual button, its working...
Hi buddies,am stuck with a 333 error on a Ryobi 522PF,anyone with an idea on how to go about it?
Any Engineer online,please clarify for me whether the bearings in the MO intermediate roller are 6003 2RS or 6203 2RS.
William S, I hope you got sorfed out, you can try Press Parts, they are online, you can select the part from their online catalogue, if you still...
@waqaz_zahid, I got it right, one of the switches responsible for maximum point was faulty and out of setting, I replaced with a new one and did a...
@waqaz_zahid nice approach,,the switches I had not thought of will check positions, I had focused on the cams alone. Thanx buddy.
thanks wunmi-50 will do
the motor and the rod are at ninety degrees, i.e the motor is horizontal while the rod is vertically mounted.
I HAVE a motor with a worm gear which drives a rod with two worm gears the later attached to a gear . This gear turns a set is toothed plates...