That's a way out than usual. Something must have gone wrong or somebody might have tried it to "fix". But anyway, let's try to adjust it. open...
Hi This is a very old thread. But it doesn't matter. Will try to help you out. Let me know exactly your problem. 1. Is the displayed measurement...
Hi Can you see the dot in the middle display? Can you send a little video clip when the machine is turned on?
@ashok kumar, thanks Can you kindly let me know the procedure?
Hi Anybody know the characteristic curve re learning procedure of the Pillar IR dryer? I got A30: current line unknown error and lamps won't turn...
Did you try the other combination? Heidelberg button on the filter card + stop button?
How did you press the keys? Which combination have you used?
Ah.. I see.. Glad the machine is back on line.
Hi 654 means encoder pulses missing. If the SAP is OK (best way to check is, move it to another machine) you have to check the encoder
Already done. They don't have this as a spare part. They want us to buy whole doser unit which is much expensive, just for a little diaphragm.
Hi all Is there any place to buy this diaphragm in Technotrans aquados dosing unit? Photos attached. Thanks in advance.
Hi The flashing dot means "the cutting cycle not completed". Check the clamp sensor (remove the plastic band over the cutter frame and there is a...
Hi Remove the guard under the front table and There is a card called WSP. Pull it out and put back in firmly. this is what happens when you pull...
Hi Auto wash what? Roll? Blanket? Impression cylinder? There should be. But may be they have removed when you buy it. Who knows... See whether the...
Hi According to your description, I too feel that, before checking the brake itself, you should check the power transistor (most of the times...
Hi It should actually be read as "SET". there is a microswitch under the table and it's the 500.00mm mark. Check that switch. You can see it's...
Hi An error Code like 970 is impossible in the EM machines. There should be 2 digit code in the rightmost display. Even in ED, there is no such...
Hi Pleasure to hear you solved the problem. What happened to the transistor? Definitely it wasn't a short, right? You were so lucky, because it...
Hi Let me tell you my experience. You have an EMC I, which is very old. First, in this model, although the power supply board is 2A, you should...
Hi all Does anybody has the documents for the French paper cutter called Muro Goodhale? It's also known as FL22. the computer system named...
