I recomend ryobi, it es doble dimeter impresion cylinder muchos better forma heaby stock
Issue resolved was a sensor of door
I have a Duplo DC 48 stitch and in the control panel is a red light on indicate jam paper but is not a jam paper in the machine. I clean two...
Sir i will appreciate if you could send me the manual of DC 48SH and 48F my email somma1981@yahoo.com.ar thanks in advance
Mkl Here is the manual regards
Dears: I have a problem with my dampeming system on my Ryobi 662H. the dampening system is continuos with a bridge roller. After running a...
Sirs: I already found the user manual, It is for 76SC, but it apply to MKL computer. If somebody need it please write me. regards
Dears: I am looking for a user manual of a MKL control programm for Schneider Senator Cutter. Can anybody help me? Thanks in advance.
Sir: I do not knowif you can fix your issue. If not may be you have too much pressure between the oscillators and the rubbers cilinders, if...
Dear Sir: First, you must check all the blankets and plate are free of movement and check the overpressure of the grippers (print cylinder and...
Jimmy: what model of komori you have? Is there some moment that the papers is taken firmly by the grippers after the transfer to the next...
Dear Mr. Jimmy: This issue hapens with every papers thicknnes or only with ligth papers. Regards
Dear Demel: This is not a easy problem. The "play" that you saw is not too much Try to do this: Put a little "heavy" grease on main gears,...
Dear Demel: try to do the following: first step, change the bed at the blanket to less thickness to get lower pressure between plate cylinder...
Hi Demel: I have read about hardnees roller in my handbook machine and is 25 shore. regards
Hi demel Thanks fot your update. Could you explain again what you did with the chain delivery thats the streaks gone away? regards.
Dear Demel: Please take off all the plastic gears, may be it will take time, but when you are having a strange problem and you need take all...
Dear: If this machine works with vacuum air to hold the rear edge of the paper, check if you have a obstraction on insede the air pipes. regars
Dear Demel: try to do the next, put off the nylon gear in contact with the master metal gear that move the oscillating roller to the ink...
Dear Demel: Hi, You can see in the picture attached the distance called JR, if this distance is too short the gears don´t have a smoothly...
