Maybe the tires are worn out too, or what? There is no paper cutter having a gear box for the backgauge movement. Coloured paper
I would check: Is the shaft inside the blower motor rotating? If not, check the power supply at the motor, maybe by an electrician. If yes, check...
The "ON-switch" is beside the mechanical hand fine adjustment of the backgauge. The "OFF-switch" is one of the cut bottens. The on-off switch in...
The overload switch is unterneath the the front table. You don't need to open any cover. Coloured paper
Which machine do you have? Coloured paper
Hallo Wolfgang! Grundsätzlich sollte man das Messer nicht zu tief einsetzen. Wenn das Messer nach dem Messerwechsel zu tief sitzt kann es zu der...
No problem. Send me an E-mail address via the conversation
S7 is between S9 and S8. The limit switches from the front to the rear are: S9 limit switch forward movement (no false clamp plate used) -...
If you see after the reference run the size (backgauge position on the screen), the reference run is finished and okay. In case you have no fast...
If I understand you correct, the backgauge moves forward slowly and stops at the reference point (somewhere at approximatally 30 cm). Coloured paper
The reference run in a Polar 115 EMC is an automatically functioning procedure. You switch the machine on and you see the message on the screen....
Hi Robco! There are three hints only. Underneath the front table you have the mains switch, the pressure adjustment knop and the lock valve for...
Hi Okwonga! On the right side of the machine you have a cover. If you open it, you see right of the hydraulic cylindre a wire. This wire is...
To late - He has his documentation But - Thanks anyway Buntpapier
Молоко - есть только три буквы О. :-) Regarding the drawing and the operating manual I need the machine number. Coloured paper
Hi Chris! To get you the right drawing I nee d a mail address and the correct machine number
Do not cut anymore! First take a look if the shear bolt inside the connecting rod (connecting paese from the gear box to the knife carrier) is...
The error message list does not give you anything. Maybe it would be even confusing. You guidance. You tell the problem and I try to help....
Hi motaz! The number 128 means cut buttons faulty. This is easy to fix, just change the cut buttons. The other numbers are normal text and an...
Hi Steve! There is nothing you could do on your own. On the machines 78ES “mostly” the transformer TR1 for the power supply is gone. The...