Hi, The main body (print engine) is identical. The differences are the print controller and finishing options available.
Hi, One large factor in this is how the "Printer Gamma Offsett" is set up for the screen you are using. This has to be set up precisely to...
Hi, Are the stripes in the feed direction or cross direction on the paper. This is critical to determine what the cause is. Regards.
Hi, The firmware is Image control program/Print Control Program Ver. GN3-70). There are also Dip switches that need to be set which enhance the...
Hi, The Ikon brand are rebadged Konica Minolta machines. I beleive they use slightly different toner bottles (toner is the same but the bottle...
Hi, i believe they will be releasing a new du-102 drum soon. This will resolve the toner spotting issue. In the meantime you can request from the...
Hi, I cannot supply this information unfortunately. Replacing the developer requires entering service mode, it also requires running the machine...
The first thing i would try is a toner refresh. When the toner goes off inside the developing unit it can cause this. Also ensure your charge...
Sorry forgot to mention it could be caused by a worn developer. If you are familiar with the service modes within the machine i would output test...
The Gamma sensor is located just to the left of the transfer belt unit (in the main body cavity. If you slide out the process unit (Drum,...
Hi, There are a few small differences between the C6500 and C6501. They modified the Laser units and implemented a slight change in relation to...
Eric, This depends on the Rip you are using with the C7000P. Most popular is the EFI Rip (IC-413 or IC-306). In the EFI driver there is booklet...
The code relates to a Dmax error for Magenta. Most likely due to either a dirty Gamma sensor, faulty Magenta developing unit or Drum. Turning off...