Search results

Refill grease and stir it up turn off machine turn back on

Do you have air in machine when you check ✔️

Decalcify your rollers good roller maintainable is crucial for water control.

How old is the press how many imp these parts are designed to eventually fail.i can not tell you how many owners did not understand this . sometimes you gotta spend.

Unfortunately this seems to be the trend; either they don't have the knowledge or they don't care. Make sure when you perfect, you give your self room to maneuver. No maxed out headstops or cylinder

If correct screen values were not entered in pre press or press curve's are not considered . Delta means nothing

Take a photo of errors screen and post here in the short term.make sure eyes at front lays are clean .

Adjust them properly . for every job.

I would not cover the color bar you would probably get a muted . density reading and color will be off

The plates falling out of the clamp is big problem has nothing to do with feeder timing.call a technician

Adressagraph Multigraph was the company name there was hundreds in NYC of these machines back in the 60 _ 70s good little machine.for learning.

Go with komori .may be better

Allister please post a picture of the plate clamp.on some manual clamps the parts inside can be replaced.silver colored plates for each section .

Aliister You must use plastic safe penetrant or you can damage plastic bladder.be careful

I don't think the Allen on 74 will tighten grip . Two people required to remove plate clamp assembly You also need to lock clamp in place with special Allen bolt before removing clamp dozen of spring underneath.you would need to study video.or schematic thoroughly.care on this one

Make sure the sensor on drive side of delivery is not damaged.clean all barrier sensors on the delivery

You may have timing issue.the stream of sheets had enough momentum to feed into the press the last sheet may arrive late check your timing . clean the eyes on the infeed

Yeah I think so

Yes we had a40 inch Roland and tp 38 Miller I think I remember you.lwas running the white 40 Roland 2 color did you have long hair.at the time . Ritchie grizuuti was foreman owe all those guys taught me thrig ht way to d

Hello Tom first job was Clark & fritts printing 229 wst 28th.then downtown 480 canal skilcraft. Then across the street 75 varick.