Search results

Hi There are 2 pot in each sidelay One in motor and one for fine positioning of the gauge. Check in dig - init/dyn test is there any error of ssk1/2 motor error Pls confirmed

Hi You need one sw knows as prepress interface which convert your ppf to the another ppf format which Heidelberg machine knows. One you create hot folder in ppi sw ( ppf in and ppf out) then it will work fine For more pls reache to me.(+919818492864)

Hi I can supply (delhi india)

There are so many reason for the same Pls confirm sweet version/press model / It may be disturbance Pls confirm once this error come, press is running ok or press also get stoped

Hi Is it solve???

Printing pressure too high is com (faulty ssk2) As per you ssk2 error is coming in dyn test If there is no error then check on display delivery pile position (pile at bottom stop 70)

Yellow error have many resons "During startup/working if position is not achieve in given time (in internal program" System give yellow error for inkzone Many reaon 1) mechanical jam 2) zero setting 3) electrical issue like 4) zero volt wiring fault 5) foils fixing wrong

Pls reach me I can help you

Hi What is the model and software of machine Panner key/Dignostic/ auxiliary drive There you will able to see motor /controller card is connected ok (or not due to defects)

Problem with 1) motor encoder 2) stk/bak card 3) is feeder pile moving ok???

Can you share error pic Reason:+ 1) powder spray device mcb trip(q35) and you switch on powder in preselected 2) delivery pile full symbol is coming. 3) any accessories you have selected which is not functioning ok(yelow error)

If you have remove pneumatic sensor wire (feeder ds) near to name plate. Then it seems problem in AIOB( Sak2) board Can you share current value reading

11 is for feeder. 13 is for cpteonics console Check accordingly

Hi sir There are lot of setting to check if this error is not eliminated And need some trained engineer to check all zero setting as well as all sensor

Hi Pls confirm you buy new ipc from Heidelberg or is it a normal pc. On normal pc you can't load cp2000 software. For original (new/reused) ipc you need winxp (virtual or as main program) then only you can do. If need step by step guide(online help) pls reach me my mail Or if you need...

Hi There are 2 ipc One for press 2nd for inspection content. On inspection control ipc you can fix external monitor to check the problem. Also Ipc, inspection control pc, scu2b connected via one network hub, pls checl the connection. Also you can check all 3 computer with your laptop by...

For above error there many reason 1) hdd Or cp2000 software corruption. 2) electrical noice(disturbance) in main pannel For 1 st step we will try to load the software. Or replace the hdd. If you need hdd with se load pls reach me on my mail/whatapp

Main compreasor(m5)give blast air and vacuum to feeder . M6 /m7(trubine type) gives vaccum and air in delivery. For more clarity pls send us machine model year as well as pic of airstar

Hi If machine is running primary master disk then 1) try to change hdd change over switch to2 Then switch on machine, ipc will restart 4-5 times and then ipc will boot ol If you have already done this then you have to change the hdd disk Need ipc lable if it is Mc4 then pls reach to me

Hi If screen stop at blue circle and 3 dot near circle don't complete then reason is 1) press didn't boot 2) ethernet cable rgp/scu and ipc is faulty. If still not done then have to check on vdo call Pls reach me +919818492864