if you send me yours.
I'm sorry. Now I saw that the machine is in Australia. These are dimensions in inches. So the machine is factory made to work on the rings. The...
Looks like a special order. I can't say exact thicknesses. Accurate information can be obtained from Roland.
The instructor who puts the machine...
Please take a picture of the plate that I am interested in.
Error 74 is a positioning error. It can also be indicated by a defective potentiometer. Тhe motor current must be 950-1100mA
You're right. It is better for him to work than a floppy disk. Hopefully start. I prefer the hard drive because of the speed and DOS directory.
Not all versions are bооtibles . It is theoretically possible, but I prefer to use the system config.
Loosen all round head bolts half turn (part 8, page 16-9, from 19_m3d16.pdf)
Choose a language.
Choose the configuration of...
You need a someone who knows DOS.
So:.....a little help
You need a PS2 keyboard.
Plug it into the machine's computer. (Right under the foil...
Each machine has CPL software included with the floppy disks. Give me an email.
If the machine is well installed, the program must be loaded onto...
Nothing can be checked without dismantling the console. Only the CPL service program can be used.
Here is some help for dismantling....But I don't...
Ja. Use the CPL program from my console. You must have the software together with the machine software. If not, I can help.
If you spoke Russian,...
X = 110mm, potentiometer voltage~ 3.66
X = 125mm, potentiometer voltage ~ 0.56V
5 & 6 mm imbus. It is only necessary to dismantle the CPL. Be careful, it's heavy.
But I don't think dismantling will solve the problem. I...
R502 or R702
In my opinion, this is Roland's worst machine.
Write at least a year of production. The old 200 or 200E?
The old R200 if high delivery, has room for UV drying
I think the problem is with the BKF communication board.
Write how the problem occurred.
To programing BKF u need Parafin