Search results

  1. ashok kumar

    Speedmaster 102 – "Feeder On" Button Not Working, No Main Error

    Printing pressure too high is com (faulty ssk2) As per you ssk2 error is coming in dyn test If there is no error then check on display delivery pile position (pile at bottom stop 70)
  2. ashok kumar

    Issue with Ink Motors on Heidelberg Speedmaster (2-Color) - CP2000 Screen

    Yellow error have many resons "During startup/working if position is not achieve in given time (in internal program" System give yellow error for inkzone Many reaon 1) mechanical jam 2) zero setting 3) electrical issue like 4) zero volt wiring fault 5) foils fixing wrong
  3. ashok kumar

    Cp2000 setup

    Pls reach me I can help you
  4. ashok kumar

    CD 102 slow down motor problems

    Hi What is the model and software of machine Panner key/Dignostic/ auxiliary drive There you will able to see motor /controller card is connected ok (or not due to defects)
  5. ashok kumar

    Delivery pile not moving up or down

    Problem with 1) motor encoder 2) stk/bak card 3) is feeder pile moving ok???
  6. ashok kumar

    Feeder head not working

    Can you share error pic Reason:+ 1) powder spray device mcb trip(q35) and you switch on powder in preselected 2) delivery pile full symbol is coming. 3) any accessories you have selected which is not functioning ok(yelow error)
  7. ashok kumar

    Excess Pressure of pneumatic compressor

    If you have remove pneumatic sensor wire (feeder ds) near to name plate. Then it seems problem in AIOB( Sak2) board Can you share current value reading
  8. ashok kumar

    Error 11 & 13 on cptronic front panel

    11 is for feeder. 13 is for cpteonics console Check accordingly
  9. ashok kumar

    Perfecting problem

    Hi sir There are lot of setting to check if this error is not eliminated And need some trained engineer to check all zero setting as well as all sensor
  10. ashok kumar

    How to install software CP2000 Prinect to IPC

    Hi Pls confirm you buy new ipc from Heidelberg or is it a normal pc. On normal pc you can't load cp2000 software. For original (new/reused) ipc you need winxp (virtual or as main program) then only you can do. If need step by step guide(online help) pls reach me my mail Or if you need...
  11. ashok kumar

    XL75 - Inpress Icon not working

    Hi There are 2 ipc One for press 2nd for inspection content. On inspection control ipc you can fix external monitor to check the problem. Also Ipc, inspection control pc, scu2b connected via one network hub, pls checl the connection. Also you can check all 3 computer with your laptop by...
  12. ashok kumar

    Machine (SM102 5P2) stuck after CP2000 loading process

    For above error there many reason 1) hdd Or cp2000 software corruption. 2) electrical noice(disturbance) in main pannel For 1 st step we will try to load the software. Or replace the hdd. If you need hdd with se load pls reach me on my mail/whatapp
  13. ashok kumar

    2003 SM74 air cabinet

    Main compreasor(m5)give blast air and vacuum to feeder . M6 /m7(trubine type) gives vaccum and air in delivery. For more clarity pls send us machine model year as well as pic of airstar
  14. ashok kumar

    cp 2000 keeps restarting

    Hi If machine is running primary master disk then 1) try to change hdd change over switch to2 Then switch on machine, ipc will restart 4-5 times and then ipc will boot ol If you have already done this then you have to change the hdd disk Need ipc lable if it is Mc4 then pls reach to me
  15. ashok kumar

    Cp2000 got stuck

    Hi If screen stop at blue circle and 3 dot near circle don't complete then reason is 1) press didn't boot 2) ethernet cable rgp/scu and ipc is faulty. If still not done then have to check on vdo call Pls reach me +919818492864
  16. ashok kumar

    SM 74 -2P, Synchronization Error while printing

    Hi ramesh How are you Flag sensor need to adjusted for storage drum position Please reach me at +919818492864 for further
  17. ashok kumar

    Cp2000 stuck at prinec

    It seems somehow software on 2nd disl is not loded. Fr proper support need press software version as well as ipc details.
  18. ashok kumar

    Suprasetter - Plate Counter?

    If you have prepress manager then you can. Otherwise you have to generate a log file (in spannee menu) Click on summary and generate log file press view now you will able to see Hopefully it is useful to you
Back
Top