we fixed the issue.
Is seems that the relays on the motherboard and operation desk were reset and needed to be armed. See photos attached.
We have a strange problem that occured suddenly without any apparent cause.
We were printing a job and everything went fine ..we started to...
yes, i still have some...let me know.
I am adjusting the gripper strength and I lost the height that the grippers release the paper. I cant find anything in the documentation. Anyone...
Thanks Chock, I found a person that sells second hand. 300 eur.
Hello, I need a part for the motor. See the photo attached of the Tachymetrique (This is not the original part I have been told, when I purchased...
I got it to work, it seems the press requires that the feeder has to be on, to then turn on the the dampening roller on.
The person I had looking...
Any ideas what this could be?
the tech person had a look but cant find or understand the problem. I dont have access to any roland specialist in my area.
There was a company...
Not yet, will check asap.
Few clarifications please..
What is "DIO02" and "ZST"
Hello, I have a problem with the dampening units on a Roland 202 TOB.
I can get them to get in contact when the machine is on stand still but...
i will create a new problem for the dampening unit issue
attached some videos to explain my problem.
Yes thats correct.. we had the same problem. Forgot to mention this..
Hi chock, thanks for your response. I have no clue where to look and have checked the schematic but i cant understand it.
When i press forward...
Hello, I have a MAN ROLAND 202 TOB. And I am getting error D45 in german its "Stromrichtergerät fehler" translated "Power converter error" I cant...
sorry could also have been this one... can remember exactly
You may need to open the side panel to have a good look, this rod activated a sensor. That was my problem
make sure this metal rod is not pushed in
Hi Jan, yes really good news with presstek, technical support and parts have improved alot. We were considering selling the machine due to plate...