If you want, feel free to give me a call. 714-292-6912
That was why I was having you check the DFE . transmission problems come from submitting file information from the DFE not from the psip
How do the indicator leds on your rip pwbs in the dfe look? How about the fiber interface pwb indicator leds?
They run on 3 phase 60 hz.
Did you buy the Igen 150 and 4 from the United States? I would need to know the serial number of each machine to determine if they're 50 hertz or...
You can call me at 714-292-6912 for any help you need. I offer self service training also.
You'll have to remove the back covers and release the tray catch, then slowly push it out and be careful not to break the stack height plastic arm.
Check to see if the shutter to the yellow Ros is closed and blocking the light to the pr belt.
8.5 x 11 won't feed from the upper trays.
Feel free to give me a call anytime 714-292-6912
When you can go into the stacker unit lower your stacker tray and check that your vacuum belts are all lined up with each other in each set. That...
It could be pulling air in from the BID return line
Problem is repaired. Believe it or not, it was an ip address conflict assigned to the freeflow from his network.
I can help.
I think so. I have 2 available that are in excellent condition. I service igens and I used these in my shop before deinstalling them to get some...
The center baffle in between the magenta donor rolls needs to be reformed or replaced. The plastic blade is catching the developer material and...
Possibly check Cyan donor roll velocity.
Peels give me a call when you can. 714-292-6912