The last possibility is a bad dampening solution level sensor. The rollers stay dry, rev up and ....break down.....
Adjustment of the pressing springs of the rollers. And then a new adjustment of the rollers.
Menu "DR Forval" (preselection), F9 Kennlinien Einstellungen, F4, Farbwerk, Ruechdrehender Farbduktor, + or -. Normal set is 10mm. , every 40s.
Double sheet detector must be set, with one sheet, for each material. Do you do this?
This is the motor. The sensor and magnet are under the top (pictured) cover.
Poorly adjusted water rollers or a loose magnet in the motor. In very rare cases, a damaged motor speed sensor.
How reverse movement is set?
I don't see anything wrong in the video. Is the machine with or without temperature control? And look in the settings. Whether duktor reverse is...
R500 or R700? 2001 or 2012?
ALL machines manufactured at MAN factories have built-in German language. This language is the easiest to diagnose problems with. All...
Try to address first. 9C
If you change the language of the machine to German, I will help.
It's easiest to copy, paste. Code 2, parameter 20-copy, parameter 10-paste. It is done with the display from the picture. If you are looking for...
Reinstall the machine software. Format the hard drives beforehand.
What series is the machine? 704 is not a technical term.
It depends on the series of the machine. Not necessarily from the console. I use my laptop. Primo, use "9C"
Adjustment of the press cylinder gripper rollers first. You need a special tool.
Adjustment of the gripper rollers of the impression cylinder. [ATTACH]
UWR input board.
Not enough.
