on the X11 sheet, pin number 1 is mentioned on the right and it is from there that you can start calculating from right to left.
you will find...
Remember at the same time .
Put jumber on 9_10 and 11_12
Please sir do that and your issue will be done
Switch off the machine ،do this procedure for 30 seconde carefully and switch on the machine...
Hello sir , you need to change the machine mecanically to straight mode and then reset sak board .
You dont need to do all that , on zsk board ghere is X11 plug try to short circuit in the same time the 9_10 pins and 11_12 .
Turn on again the...
Please do it simple
Hi sir .
the sm52 can print premium white paper and also coated paper up to a thickness of 0.6 mm, however it is not suitable for cardboard.
Please do that .
Hello, if you have not yet solved the problem, try changing the membrane, the filter and the seal on the alcosmart (if...
Mr mozdahir, please make this diagnosis:
First of all, make sure that the communication cable is properly wired (pink cable) on the SCU side and...
close the valve of the compressor bottle if the filling is done in 30 up to 1 min then the compressor is in good condition then you must...
I will check that for you tomorrow .i must see the wiring diagram
Can you give me the error code of this issue ??
Wich machine is this ??
Modular or cp2000 ??
Contact this :+86 156 1111 1146 angrui
Or this one : +91 99996 88616 pradeep jha
Make sure that power in the transformer is good and check board if there are some leaked components
Please give me init test of slt-con to see what happends .
Tell me please is the machine running or not ??
If i dont understand your question please give me picture of product .
If I understand correctly, you are used to printing with offset machines and now you have changed the type of machine without changing the...
I know that it s an old issue .
But we give more information for someone who searches solution to the same issue in the future.
He will find more...