Hello guys i have this couple voltage error about 2 colors magenta and black the boh errors message are attched with this post high voltage error...
go to my computer -jobs folder -special job -gray 20 import
Like i said clean the side gears and use a loop if necessary - you will find the whole mark. Take your time
hello if you lose the red marks, there's a point hole in the side gear. Clean the gear so you can see it from side machine. It should be one hole...
hello guys am in need of hp indigo 5000,4000,3000 ink developer bid blanket let me know prices please
I have a problem with my yellow ink won't print due to many errors as showing in pictures first error it said sometimes ink its not piping or bid...
I have problem with my hp indigo 5000 vacuum; even changing to high value, the value keeps bouncing from 0.75 to 0 and from 0 to o.75 after the...
the error message is gone by switching the PCN machine in standby thank you
Ok i will switch the PCN tomorrow i have a used working one .
no i didn't the cable coming from the PDB board to the PCN was touching the metal box and creating shortening but this problem been fixed i...
it was the PCN shortening in PLUG coming from first top connecter from PDB I fix this issue now the fuse do not blow up but the problem i still...
hello guys i have in issue about my machine still in initializing and won't get to standbay problem is : 1-can bus 2 failure 2-node- NODE _SCI[1]2...
It work perfect once i line up the gears thanks only one thing make me crazy i did buckle adjustment and secion cup adjust and want go true full...
I will thank you working in it
The Red mark in the Impression drum do not match the Red mark in The ITM Drum i think its synchronisation problem please how to fix it and send...
Encoder calibrated and harmonic status Completed
after i got a big blanket jam and role in the exit impression drum roller after i cleared the jam and pieces i install new blanket but i found...
my cyan ink contaminate my magenta ink so i am trying to run bid engage /disengage wizard to to calibrated but it give me this error message...
please how to do it ?
Cyan bid as you can see there's magenta bend vertical witch mean cyan bid had a problem
