I don't have a mail....
FDM17 or FDM19?
What does the diagnostic program say?
Call at Telegram. I will send you documentation.
What year was the machine manufactured? Only last have a battery. The first are with the Dallas chip.
Auto zero position is 1020-1030 mm
Hand terminal can check end sensors.
Check the engine. It should be 2x 3-5 ohms
1990-2005 the some POS drives have a potentiometer. After 2005-6, POS drives are EA2, now they are EA3
Machine 2002 does not have an auto-zero...
If you had written at least the year of production, you could have learned more. Not all R700s have an auto zero of the registers.
The problem is not related to BKF / SIMOREG.
"Phasenausfall" does not mean lack of phase.
Looks like a problem with the SPS bus master. That's why I'm asking about the stop button. If there is no error, reinstall the software. Call me....
is there an error when the stop button is pressed?
If you can't copy, you can't paste.
Copy/paste can be done with a keyboard. The up/download from/to file needs a PC, GlobalDrive + lecom, NET or...
If there are no broken parts, you need to put the machine in one side print. In your situation, I suspect a damaged double valve on the pneumatic...
7zip from dick:
Original from Roland or chinese 1?
this motor does not change direction as you change phases.
resolver is not positioned.
Remove the back cover and turn it until...
This is a repaired or non-original electric motor. The resolver is not positioned correctly.
"Roland 700" means nothing. Write at least the year and series (not the serial number)
This looks like a water problem. Measure the hardness of the water. It should be between 8-10 dH.(Deutsche Härte)
RTR-Real time Rechner
To learn how it works you need to read 50-60 pages.