Any screen? What kind of error?
Primer Ink is giving only better adhesion. To use synthetic materials you need to prime it offline with corona.
Silver is very specific. About guarantee for BID, please contact HP/reseller which is taking care of your press.
If bid is spitting under the PIP try to lower ink flow.
Just contact your service/distributor. Tell them that BID Base is "Dead on Production" Very early.
As far as I know and help customer to work with Silver. Seems that storing Silver BID Base longer than 1-2 weeks is causing a lot od BID Base...
I have experience with Silver Ink. You can ask me on private message if you want.
There is a plugin for that ;)
I think that first thing to replace should be Impression Engage Motor, try to clean the home position sensor on IMP engage motor and check if it's...
Mainly pay more money for higher stability and new features. 6900 and 6K has an Anilox option in ILP. 6K has new LED SPM which can measure in M0,...
Between old Imaging Oil system and a new one (with RIO) there is a lot of cost saving on Imaging Oil - if you don't have contract with HP of...
Price per click is very individual. Price of 7K also depends on how good you will negotiate price ;)
I've never heard about upgrading 3050 or even 5000 to Windows 7. As far as I know 3xxx and 5000 press is not supported with Windows 7. The last...
I already sent you e-mail with list of consumables.
If lowering value in Perfector A and B (duplex buckle) is not helping, just raise the value.
Take two M8 (6mm hex key) screws out from impression front arm, then you will have fully impression drum disengaged. Check also synchronisation...
I have few consumables. Blankets, and 20-30 cans of inks (mostly white)
He's right, looks like there is no synchronisation between drums. Check the dots on teeths. Seems that press is printing on a PIP foil clamp....
On 7r you need to set it up od external RIP or in job properties.
Press spec says: long grain 70-170g, 170-200 long/short grain, 200< short grain.
