Check to see if the shutter to the yellow Ros is closed and blocking the light to the pr belt.
8.5 x 11 won't feed from the upper trays.
Feel free to give me a call anytime 714-292-6912
When you can go into the stacker unit lower your stacker tray and check that your vacuum belts are all lined up with each other in each set. That...
It could be pulling air in from the BID return line
Problem is repaired. Believe it or not, it was an ip address conflict assigned to the freeflow from his network.
I can help.
I think so. I have 2 available that are in excellent condition. I service igens and I used these in my shop before deinstalling them to get some...
The center baffle in between the magenta donor rolls needs to be reformed or replaced. The plastic blade is catching the developer material and...
Possibly check Cyan donor roll velocity.
Peels give me a call when you can. 714-292-6912
Did you ever have a resolution to the 08-3263/64 error you were having?
Does the 032u in the igen4 pantone book like the one in the file?
Always say, De-oxit is a tech and operators best friend!
Thanks for the heads up!
Where did you get the rolls that are melting?
Did you do External heat roll nip adjustment after replacing the broken screws?
I didn't mean the motor itself, I meant the transports that it turns.