Can bus is comunication between mcn and pcn. So probably you have a problem in one of them. Normaly is pcn problem.
Have you replaced the pcn?
Do this before you try other things.
Scu DCI mic is bus 0
Pcn is bus 2
I think you have a problem in pcn, is it lighting? Can you change it?
Take out black power cable going to pcn...
99.9% bad ILD.
I can send one if you need.
Sen me a private sms for quotation.
Dont need it. Just put an small tool inside to check the hole in the disc is in good position.
I have checked and is dsc board controlling this...
I think you need to replace the pcn board maybe only dsc board (the top board)
Is anyone selling it?
Thanks in advance!
Hello, looking for hp ink for this machine.
Please let me know.
Adjust accurately the main encoder. You said you move it before, so probably needs to be adjusted again after you synchronized the drums.
Did you change ink and bid position in software well?
Need to go to options/press configuration/inks and bids and change the position.
Here in the image I think you have bid problem. Probably magenta or cyan. Need to change them.
So you put more pressure between pip and itm drum?
The problem I think is there. I am pretty sure is not a bearing problem.
I will change itm drum.
Check if increasing or decreasing second pressure transfer it changes.
For similar problem I had to change itm drum.
If you think is something with comunication cable. Just put a bypass as you see in the image.
Turn off the ciller and press this for a few seconds.
After turn on again.
Let me know
Hi Sergio, can you explain better the symptoms? Any sms in the display?
Is the pump rotating write direction?
Maybe need to change round to fases...
Hdi 160 and 175 printing ok?
If only hdi 180 not ok i think can be writing head problem or Vcorn.
Which HDI are you using? Do you have the problem in 160/175/180?
Which temp. Blanket you print with?
Are you printing with level 1,2,3?
Are you using blankets for 5600? Its important you use correct blankets.
When you do color adjustment, do you have a nice curve?
Are you using...
Are you using good blankets?