The machine does not run and gives a Speed Error.
2) ManRoland R204E 2003
3) Attached Picture
4) 3.8201-Ea Baumuller / 3.9409B Baumuller
5) Amman, Jordan
Looking for a replacement circuit board for Roland 200E. Pictures attached!
Anyone can help?
I have been trying to make sense of the following:
There is a small problem with the guillotine I have causing the paper to have a size variation...
Any advice on how to replace the bearing found on the Vibrator Roller Cam as shown in the image.
Do you have any UV inks suggestions?
Air was leaking as soon as the dampening system is pressed on the plate and has been fixed. But it wasnt the issue.
I agree that air leakage can...
Thank you everyone for your suggestions.
The problem was fixed by replacing the plate dampening roller between the 2nd (Cyan) and the 3rd...
I have a problem on my Heidelberg SM-52, the 3rd Printing Unit (Magenta).
1- I have replaced all Printing Units inking rollers...
Hello everyone and happy new year,
I am doing a research on the best offset printing machine for Plastic material printing with UV dryers.
I have tried increasing the IPA level to 10% and the pH to 5.5 but the result is the same.
What do you mean by integration?
Btw, I am using...
I have resolved the issue, it was indeed the adjustable stopper.
I adjusted one of them to a certain angle and then I saw the...
The adjustable stopper is an eccentric bolt.
Does it affect if I adjust one of the adjustable stoppers to a position different than its original...
Thank you for the advice. I have looked at the bearing at Pos 6 in the diagram you attached. It seems worned out on my machine.
I will fix the...
I have been having an issue with the UV inks im using on the Roland 200 on PVC sheets.
When I start to print from the first sheet. The UV...
I will check the cam, and cam roller and re-adjust the 2 grippers on the transfer cylinder of the first cylinder and get back to you.
You are correct, the paper is not coming on the first unit the same position. But the sheet is moved the same exact distance from sheet to sheet....
I have checked the side lays and the front lays. The problem is not random. its consistent for every other sheet.
I have a registration problem on my Roland 202 E 2003.
When I print (for example) 100 sheets after fixing the two colors together, it...