Just replaced the Journels on my GTO Cyan Water unit. It was a 2 man job that took 5 hours that was for one set of housings on one form roller....
It depends on the stock (coated will take less than uncoated) and coverage of your print. Start low and build up to color
Im suggesting the rough side of a sponge, nothing too abrasive as you don't want marks to start showing up on the bottom side of the envelope....
I've scuffed up mine with a scotch brite pad, also make sure your swing arm is making good contact.
well thanks for your help
Rice Lake, WI USA
What is it suppose to be at and how would I measure it?
I have never done a focus calibration. What does that entail?
here is what it said after the Laser power inspect
this is what keeps happening
I have the option of Laser power inspect. I have done that before but I don't know what im looking at when I do it.
I was shown nothing on this machine. I would check the intensity of the diodes if I knew how.
I have a Cron 26H UV CTP machine that is leaving vertical lines on my plates sometimes its just one sometimes theres 3 to 5 of them all...
Hello I have a count auto pro II which shorted out and I need a new m121 control board doesnt have to work I just need parts off of it.
Still haven't had this issue resolved and Martin Yale wont help me. Partner has good circuit board knowledge I just need to point him in the right...
Never heard of them but I've soaked blankets in water before to rejuvenate them and that has worked before so it is possible
Hello I have a Count Auto pro plus 2 and i had a short in my numbering head and blew something on my circuit board. I tried replacing the Triac's...
we are looking into a new machine to replace our Konica C220, is the Pantone matching system all they crack it up to be?
I would ask for a Video Demo of the machine outputting some printed materials, then you will know for sure if it does work as they say and you...
never use Ajax to clean your water system it contains calcium bicarbonate which will continue to cause scumming, Comet is perfectly fine tho