Pls call regrigation person and check the gas in the chillee
No can't use touch monitor.
There are option
1) but only touch in place of full monitor.
2) get mouse enable in the system and use ps2(round...
For same some have to set the flage sensor properly
To print special color you need special ink., other then cmyk.
So total job will be of 5 colors.
If you want to print using 4 color then...
For packaging always best option is straight press
If 5 volt dc at ssr board (where ssk are plugged) is less then 4.8 volt then ssk will not intialized
This error says there is intrupt in the data flow between main cards( rek, rgp, sak, esk)
Pls remove all 220volts (fans, electric static...
Normally mwe/mot burnt due to short circuit (in cable, potentiometer, sprial cable on the operator side.
You have to check following
Can you pls send me the pix of broken parts
Once your technician come pls drop
A msg I will guide him
Keep time line in mind (here it is +5:30 )
As per pix send by you for sw vesrion
Cpc104 is visible there means your cpc is also booting ok but display biscuits not coming.
Can you check...
1) in cptronic check sw version. Is there cpc104 version visible or not.
If cpc104 version is there means your cpc booted then probelem in...
Basic of feedtable upword movement
Machine run feeder on, you move up feedtabel upto a positiin where paper is sensed ( one sensor justvbelow...
We can supply
I can supply new hdd for mc2-ro/mc3Ro
Hdd type ide ssd.these hdd come with Preloaded window like original hdd comes previously from...
It is very easy to enable the mouse pointer.
In case if you need any further help pls contact me
Is it fix or not
On drive side there is belt which needs ri check on the first is it ok.
After that check the clucth and it's supply
It is very tough to achieve the pentone color using 3 penton+1 process black ⚫+one yellow (mixture of two colors)
It better you convert pdf...
Do you need the operating manual of perfaction machine (semi automatic/fully automatic) or you need something else