Congratulations for solving the problem
What is problem you found
The ps card problem solved by electronic engineer repairs but when searching for reference it stop at first slow backwards
And the m17...
The DC to DC PSB5A5 module have problem also d7 diode have problem
So electronic engineer advice to buy new ps card
I appreciate your concern
The volt is 32vac , I will try with lamp 220v/ 100 watt
Yesterday I try the ps card in another machine also...
Thanks for your reply
I don't know how the lamp will lit without 0 vac or neutral, or you mean it will add load to the circuit to...
There's is problem with polar emc monitor machine
There is short circuit in the polar cutter we changed pmf.f1 6.3 too much also there's short...
I appreciate your concern and help
But someone told me to grease the valve
And the machine work
And when the volt in other machine...
Our polar Emc II(without monitor)
Have a problem with stop and it sometimes give measure lower than setting measure and sometimes give...
Today I grease the safety bolt
So it work very good and the volt still 32
Thank for reply
I will do your proceed next Sunday because I am in vacation
But I am sure that i changed the power supply from another working...
I changed all the power supply from another machine the y.sb volt is still 33 vdc ,I test y.sb and proximity sensor in other machine...
I have polar Emc monitor as follow cutting Blade don't come down when the cutting buttons are pressed but the clamp do and screen give error...
Does someone use its electrical cards like eak2,mot,mwe,sek ?
Could you please help me
I have problem with Goss m600, the
Machine increase speed and give us the attached error
#270 web catcher cell...
Thanks for you
The problem solved
Thanks for you
I send the email in conversation
Is there is picture for the place of switches and sensors on the machine
I will check s7 but where its place
Or its name
Yes the machine backguage move forward slowly and when you move by hand wheel its move forward slowly also