Usually cleaning the entrance and exit decurler blue rolls will help with curl. If you are still having a problem with curl, there is a procedure...
If you ever have issues, give me a call and I could help over the phone.
Are you getting background while running trc linearization?
iGen 5 with 5th color (purple) and heavy weight stock kit ( up to 24 point ). Only 2 million print count.
Looks like you need to replace the IBT cleaning blade
Have you checked the IIM lamp assy? See if it comes on and also how dirty it is. Are you getting background on the PR belt?
Z target settings. What are your tc reads and targets? Post pics of each.
Depends, need to see more info. How was the esv, etac timing? What were the numbers you got on timing setup? What were the values on IOI setup?
Check black etac, clean patch generator run esv and etac timing setup then run xerographic setup make sure your esvs are setting up at .97 when...
Check and clean the metering assy. Might need a new wick and metering blade.
Are you getting constant off setting or is your fuser roll getting contaminated
Exactly. It will be located in P1 nvm in fuser switches.
Have to go into diagnostics on psip. You can give me a call at 714-292-6912 andI can walk you through it.
That line on your fuser roll is not due to not enough fuser oil. That's an issue of your RDS for the fuser assembly being turned off
Not really. Check the magenta 8 wire mod for twists, magenta charge for ripples in the screen.
Humidity and temperature can have influence on the quality. That being said, when its a repetitive pattern and on one color, then look in that...
That's the way they die. A loud pop and silence.
Just have xerox replace it. You're on contract right?
It's probably the one that was originally on the right causing the issue. They start getting weak and when you put a lot of power across drone...
You have one of your 36 volt power supplies going bad. The ones with the handles at the back of the output module.