please check attached
i have check all parts, and the failure internally in HK card , i replaced it and the cutter is ok
When i checked the sequnce of functions for cutting as in attached picture all done till led 12 off. But led 18 doesnot lit on. At HK
Thanks for your reply
For HK V1-V3-V4-V6-V7-V12 (ON)
for IAR V3-V4-V5 (on)
i have an issue with polar 115EMC /Year 1989 and need help.
when i power on the cutter it is OK and back gauge ok.
when i press cutting switches...
I have HDM SM52-4 ANICOLOR machine
IT IS THE FIRST TIME I See THIS Machine so, the operator needs any learning vedio or presentation...
I have a problem with KBA106 -8 -SW4 SIS
"control system initialization "
I checked all arcnet cables, Active IO , plc units...........
what is the problem???
ok it will be useful for me
thanks for your help
117 CUT INTERRUPTED
Indicates that a cut has been interrupted when the machine was in upper dead
centre position. This is no malfunction,...
from SAM interface in main cabinet
point 42-43 for good sheets and 40-41 for net count
i have KBA Rapida 105-8 SW4; year 2008
when any error in changing from inline to perfector and vice versa the machine completely stop and It...
after reading below diagonosis , check the haydraulic system (y27,y33,y33a) check if them energized or not !!
118 CLAMPING TIME...
Cause: This message is caused by an "excessive" afterrun of the knife, detected by the
computer. Although the machine can still be operated with...
please check attached file
I am working with CD 102 machines, i need to know the major difference between them and CX 102
white color curing need special lamps
are you have this lamps or not?